6/25/2023 0 Comments Vmd installOnce the system boots into the OS, install the SetupRST.exe file downloaded in Step 1. This will install the Windows driver and give the opportunity to download the Intel® Optane™ Memory and Storage Management application from the Microsoft Store* for management of RAID/Intel® Optane™ memory volumes.Step 4: Install the Intel ® RST driver in the OS Select the drive for the OS installation.Drivers/VMD/ within the driver files copied in the USB key media. Browse to the location of the iaStorVD.sys file.The VMD driver will need to be installed to detect the drives being managed by Intel® RST under the Intel® VMD Controller. During the OS installation process, click Load Driver.Refer to Step 1 if the USB key media does not have the driver files copied. Insert the USB key media where the driver files were copied.Start the Windows OS installation process.The Boot Option setting should be UEFI before proceeding. The Legacy Boot Option will result in failures once the OS is installed with the Intel® RST software. Save the changes and exit. Intel® RST functionality requires a UEFI OS installation.Select SATA Controller to enable this to be managed by the Intel® VMD controller.Enable the available storage ports that contain the devices to be managed by the Intel® RST driver.Image below is for reference purposes only. Refer to the system manual or vendor's support site for specific information for the platform being used. Locate the VMD Setup Menu for the platform. Available settings and location in the menu can vary.Step 2: Enable the Intel ® VMD controller in BIOS The file iaStorVD.sys that will be used later on is located here.
0 Comments
Leave a Reply. |